Pebeo Gedeo Latex 250ml

Concentrated formula to quickly mould masks, models and ornaments. Creamy, concentrated, flexible and resistant enables multiple casts. Keep out of reach of children, may cause sensitisation by skin contact. Latex Pebeo Gedeo can be easily applied with a brush on the finished object. This process is used to create masks' or shapes. It is necessary to apply several coats depending on the thickness you want to obtain (max 2 mm). It is usually applied in 5 coats over 10 minutes, depending on the drying time. You can use gypsum plaster to stabilise the Latex. Allow the latex form to dry for 6 to 12 hours. Slowly remove the mould from the object after drying. You can pour plaster or epoxy resin into the mold you are making and let it dry. Then just remove the mould and you can decorate it.

You can also make the model if you put it inside the Latex Pebeo Gedeo. At first dilute the latex with water in a 50:50 ratio. Then immerse the finished object in the latex for 2 minutes. Then remove and let it drain. Repeat this procedure until you reach the desired thickness of the latex (about 1,5 mm). Allow the latex form to dry for 6 to 12 hours. Once dry, slowly remove the mould by turning it upside down. For faster and easier latex removal, the use of powder is recommended.

Translated with DeepL.com (free version)